Decentralized ventilation unit Flow ELITE
%20(1)-550x550.png)
%20(1)-550x550.png)


-550x550w.jpg)
-550x550w.jpg)
-550x550w.jpg)
-550x550w.jpg)

%20(1)-80x80.png)
%20(1)-80x80.png)


-80x80w.jpg)
-80x80w.jpg)
-80x80w.jpg)
-80x80w.jpg)

This offer ends in:
- Stock: Within 1-2 weeks
- Product Code: 1VMC01013
- Weight: 6.00kg
FLOW ELITE – with built-in humidity, CO2 and VOC sensors, LED lighting, control via the Air Guard App.
FLOW ELITE is a premium, intelligent, wall-mounted dual-flow decentralized recovery unit with advanced technologies: humidity sensor, CO2 and VOC sensor, Color Trust indicator light to monitor indoor air quality and Free Cooling function.
The device is compact in size, quiet in operation, and thanks to two connections and F7+G4 filters, simultaneous supply and extraction of filtered fresh air is ensured in the room.
The recuperator is ideal for continuous air exchange and filtration in individual environments such as living spaces, bedrooms, etc. It will perfectly integrate into any environment, because the designer hood and additional LED lighting make FLOW ELITE a unique element that combines elegance and well-being to improve the climate conditions in any room!
TUV certified heat exchanger: HELTY FLOW provides heat recovery with an enthalpy-type cross-flow recuperator, the efficiency of which reached up to 91%. Thanks to the Enthalpy recuperator, the air is not dried and part of the moisture is returned back to the room, and no condensate drainage connection is necessary.
Operation: The FLOW ELITE dual-flow mechanical ventilation system is designed to respond intelligently to the need to protect your home from excessive concentrations of harmful substances. Special IAQ sensors allow you to constantly monitor not only humidity, but also the level of CO2 and VOCs and, therefore, the overall air quality in the room. The elegant polycarbonate cover integrates Color Trust, a discreet light sensor that informs the user about the state of the air in the home:
- blue signal - good quality
- orange signal - low quality
- red signal - bad quality
- green signal – indicates excessive humidity
This allows the ventilation unit to automatically increase the air flow rate when necessary, returning to normal mode once a healthy indoor climate is restored. Detailed values for each air quality signal can be viewed by the user in the Air Guard mobile application, which allows a practical and accurate view of the air quality in each room where the device is located. In standard equipment, the unit provides 4-speed air regulation depending on the need, increased flow and night mode function.
Cooling function: When the outside air temperature is lower than the one in the room, the user can activate the Free Cooling function, which will provide free cooling of the room based on the temperature difference. For example, in summer evenings, when the outside air is cooler than in a heated room during the day.
Control: In addition to the function panel and the infrared remote control included in the package, the ventilation system can be managed via a smartphone or tablet using the convenient Air Guard app. Users can set the desired functions both in "single unit" mode - to manage different airflows and operation for each installed unit, and in "extended" mode - to enter a common setting for all devices in the house. In the same way, the user can select, activate or deactivate IAQ sensors and automatic operation. The application also allows you to turn on / off the LEDs and adjust their intensity for brighter or softer light.
Installation: FLOW ELITE is easy and quick to install in any residential environment, especially if the buildings are occupied or if they are easily retrofitted. Only two 8 cm diameter holes in the perimeter wall are required, the power connection and the device is ready to work.
Maintenance: The device requires minimal maintenance - the user only needs to replace the filter when signaled by the LED warning light display. No need for specialist technical assistance!
ADVANTAGES:
- Built-in humidity, CO2 and VOC sensors
- Air quality LED lighting
- Built-in LED lighting
- Free Cooling Option
- On/Off LED panel
- Control via the Air Guard mobile app
- Quiet and energy-efficient operation
- Guaranteed easy installation
- Optimal integration in any environment
COMPLETE WITH:
- Infrared remote control
- Wall pipe Ø80 mm
- Outdoor facade grills
TECHNICAL DATA:
Manufacturer: | HELTY |
Country of manufacture: | Italy |
Recovery efficiency: | up to 91% |
Heat exchanger: | enthalpy cross-flow |
Sizes (HxWxD): | 695 x 353 x 152 mm |
Weight: | 6 kg |
Air flow: | 10/17/26/37/42 m3/h |
Noise level: | 18.0/23.4/30.5/39.2 dB(A) |
Noise level on the facade side: | 45 dB |
Filters: | F7 + G4 / G2 |
Electricity consumption: | 3,6 - 20,0 W |
Power connection: | 230 V AC |
Operating voltage: | 24 V AC |
Max. current consumption: | 0.35 A |
Energy efficiency class: | A+ / A / E |
Modbus RTU: | rs485 |