MENU
YOUR BASKET

INOVENT: Motion sensor

INOVENT: Motion sensor
INOVENT: Motion sensor
Price with VAT: 
336.84€
Without VAT: 278.38€
  • Stock: In Stock
  • Product Code: Motion sensor
  • Weight: 0.54kg

The motion sensor is specially designed for indoor or outdoor installation. Ingenious interior design simplifies wiring and provides a tighter seal. In addition to intelligent interior design, the attractive exterior design is matched to the interior of the living space.

Thanks to the motion sensor, the unit is not operated without application - it increases air productivity only when motion is detected in the room. For example, the unit was running at 30% power by default, and when motion is detected in the room, the air output of the unit is increased to the value previously set in the controller.

An excellent technical solution for public spaces - offices, shops, schools, kindergartens, as well as private homes and apartments.

The set includes:

  • Motion sensor 2VDC, LX 402 - 1 pcs
  • Converter 230 VAC / 12 VDC, 1A - 1 pcs
  • Black DIN speaker plug * - 1 pcs
  • User manual - 1 pcs

Connection of the motion sensor to the air handling unit:

  1. Install the CO2 sensor in the required position by fixing it with 4 screws (not included)
  2. It is necessary to install a 4 - core cable from the CO2 sensor to the unit (not included)
  3. Use 2 wires for 12 DC power supply and the other 2 wires for NO signal
  4. Remove the 230 V AC/12 V DC converter from the box and connect it to the sensor on the + and - connections using a 4 - wire cable through 2 wires. Pay attention to the correct polarity
  5. The remaining 2 signal NO wires connect to the air handling unit at the connection marked D2 via the DIM connector * (included in the kit, see figure below) and inside the motion sensor at point 2 COM and 3 NO.

 

Write a review

Note: HTML is not translated!
Bad Good
Tags: INOVENT
By continuing to browse the site, you agree to our use of cookies.