ACCESSORIES
Stock: In Stock
With five removable parts for air flow control...
Price with VAT: 1.48€
Without VAT: 1.22€
Stock: In Stock
Plastic end caps PL are used to seal unused outlets of diffuser boxes or air distribution collectors.
Made of polypropylene PP with thermoplastic (SEBS)...
Price with VAT: 2.50€
Without VAT: 2.07€
Stock: In Stock
Plastic caps are used to close unused diffuser or junction box outlets.
Closing caps with a diameter of Ø75 and Ø90 mm are used to close unused “KLIK” plastic connections.
Closing caps with a diameter of Ø100, Ø125, Ø160 mm are used in air distribution boxes to protect the air duct system and ..
Price with VAT: 1.79€
Without VAT: 1.48€
-350x350.jpg "End caps Ø125")
Stock: In Stock
Plastic caps are used to close unused diffuser or junction box outlets.
Closing caps with a diameter of Ø75 and Ø90 mm are used to close unused “KLIK” plastic connections.
Closing caps with a diameter of Ø100, Ø125, Ø160 mm are used in air distribution boxes to protect the air duct system and ..
Price with VAT: 2.25€
Without VAT: 1.86€
-350x350.jpg "End caps Ø160")
Stock: In Stock
Plastic caps are used to close unused diffuser or junction box outlets.
Closing caps with a diameter of Ø75 and Ø90 mm are used to close unused “KLIK” plastic connections.
Closing caps with a diameter of Ø100, Ø125, Ø160 mm are used in air distribution boxes to protect the air duct system and ..
Price with VAT: 2.98€
Without VAT: 2.46€
Stock: In Stock
Plastic caps are used to close unused diffuser or junction box outlets.
Closing caps with a diameter of Ø75 and Ø90 mm are used to close unused “KLIK” plastic connections.
Closing caps with a diameter of Ø100, Ø125, Ø160 mm are used in air distribution boxes to protect the air duct system and ..
Price with VAT: 1.40€
Without VAT: 1.16€
Stock: In Stock
Plastic caps are used to close unused diffuser or junction box outlets.
The closures are made of PP plastic.
They are easy to install "push in"...
Price with VAT: 2.42€
Without VAT: 2.00€
Stock: In Stock
Plastic caps are used to close unused diffuser or junction box outlets.
Closing caps with a diameter of Ø75 and Ø90 mm are used to close unused “KLIK” plastic connections.
Closing caps with a diameter of Ø100, Ø125, Ø160 mm are used in air distribution boxes to protect the air duct system and ..
Price with VAT: 1.66€
Without VAT: 1.37€
Stock: Within 1 week
Designed for transporting air of the ventilation system at an angle of 90 degrees. The bend is installed in places where a sharp bend is required and the bending angle of the flexible air duct is not sufficient.
Sizes:
Product code
Ød1 (mm)
L (mm)
FLX-B..
Price with VAT: 9.76€
Without VAT: 8.07€
Stock: Within 1 week
Separate connection of the "CLICK" mechanism attached to a stainless steel plate. It is used to repair a malfunctioning air distribution box by supplementing it with an additional air outlet.
The product have a certificate from the National Institute of Hygiene
CERTIFICATE OF HYGIENE
..
Price with VAT: 9.20€
Without VAT: 7.60€
Stock: In Stock
Plastic extensions for PE-FLEX® polycarbonate diffuser boxes Ø123 mm.
The product have a certificate from the National Institute of Hygiene
CERTIFICATE OF HYGIENE
material: white plastic
designed for: polycarbonate diffuser boxes with Ø123 mm
inner diameter: Ø125 mm
outer dia..
Price with VAT: 2.25€
Without VAT: 1.86€
Stock: In Stock
Plastic extensions for PE-FLEX® polycarbonate diffuser boxes Ø123 mm.
The product have a certificate from the National Institute of Hygiene
CERTIFICATE OF HYGIENE
material: white plastic
designed for: polycarbonate diffuser boxes with Ø123 mm
inner diameter: Ø125 mm
outer dia..
Price with VAT: 5.51€
Without VAT: 4.55€
Stock: In Stock
Plastic extensions for PE-FLEX® polycarbonate diffuser boxes Ø123 mm.
The product have a certificate from the National Institute of Hygiene
CERTIFICATE OF HYGIENE
material: white plastic
designed for: polycarbonate diffuser boxes with Ø123 mm
inner diameter: Ø125 mm
outer dia..
Price with VAT: 8.82€
Without VAT: 7.29€
Stock: In Stock
The only PE duct connector on the market with a built - in seal and "KLIK" fastening mechanism. The PE-FLEX® duct connector is used to connect ventilation ducts.
The connection provides an excellent connection of two pipe sections with high tightness and strength. It does not require the use of ..
Price with VAT: 6.67€
Without VAT: 5.51€
Stock: In Stock
Designed for transporting air of the ventilation system at an angle of 90 degrees. The bend is installed in places where a sharp bend is required and the bending angle of the flexible air duct is not sufficient.
Sizes:
Product code
Ød1 (mm)
L (mm)
FLX-B..
Price with VAT: 8.41€
Without VAT: 6.95€
Stock: In Stock
Air duct 90° bend (Ø 75 mm) complete with 2 rubbers...
Price with VAT: 6.41€
Without VAT: 5.30€
Stock: In Stock
When purchasing a direct connection polycarbonate box with Ø125 mm, it may be difficult to extend the supply outlet in the future.
Thanks to the Ø123 mm nipple, the Ø125 mm polycarbonate box can be supplemented with 15, 30 and 50 cm extensions!
The product have a certificate from the National..
Price with VAT: 3.98€
Without VAT: 3.29€
Stock: Within 1 week
Collector socket designed to repair an incorrectly designed air - distribution box.
Application: The socket can be attached to the air distribution collector by supplementing it with an additional socket. To do this, use a metal cutter to cut an additional hole in the distribution box and secure..
Price with VAT: 7.51€
Without VAT: 6.21€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter. Both transition ends are equipped with rubber gaskets, which allow direct connection of metal or flexible air ducts to each other, including to external wall inlet..
Price with VAT: 6.73€
Without VAT: 5.56€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter. Both transition ends are equipped with rubber gaskets, which allow direct connection of metal or flexible air ducts to each other, including to external wall inlet..
Price with VAT: 11.65€
Without VAT: 9.63€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter. Both transition ends are equipped with rubber gaskets, which allow direct connection of metal or flexible air ducts to each other, including to external wall inlet..
Price with VAT: 8.83€
Without VAT: 7.30€
Stock: Within 1 week
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter.
Sizes:
Ød1 nom (mm)
Ød2 nom (mm)
L (mm)
Weight (kg)
160
80
15
0,30
100
30
0..
Price with VAT: 7.99€
Without VAT: 6.60€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter.
Sizes:
Ød1 nom (mm)
Ød2 nom (mm)
L (mm)
Weight (kg)
160
80
15
0,30
100
30
0..
Price with VAT: 10.89€
Without VAT: 9.00€
Stock: In Stock
Rapid mounting screws with expansion pins available in two sizes: 6 × 40 mm and 8 × 60 mm. They can be used with many construction materials, such as: normal concrete C20/25, ceramic massive bricks for Class 15, silicate - filled bricks for Class 15, etc.
Quick assembly screws will be useful for..
Price with VAT: 10.94€
Without VAT: 9.04€