Double-threaded screw M8x160 (12x60)

The double-sided screw is used to install the EPS mounting bracket for the installation of the EPS system.

The double thread allows the EPS bracket to be attached to a wooden structure or concrete wall/ceiling using an expansion screw.

The different screw lengths allow you to adjust the distance between the bulkhead and the installed EPS pipe by using double-threaded screws of different lengths.

The double thread allows the EPS pipe bracket to be installed in such a way that the distance between the installation and the wall or ceiling can be adjusted by choosing its length. A screw with an M8 metric thread is screwed into the bracket, while the other side can be screwed directly into a wooden structural element or with an expansion stud to a solid wall or ceiling.

The double-threaded screw is made of low-carbon steel coated with electrolytic zinc coating, so it is characterized not only by resistance to large overloads, but also by eliminating the risk of corrosion.

Technical information: double threaded screw
Material: low carbon steel with electrolytic zinc coating

The universal expansion pin, specially selected for double-threaded screws, allows the EPS bracket to be installed in a ceiling or wall made of solid structural elements, i.e. concrete, ceramic brick, silicate brick, etc.

The special design of the expansion strips of the pin ensures that the pin is firmly wedged in the hole and prevents it from turning when screwing in, and the inner part of the pin has guides that guarantee safe guidance of the screw during screwing.

Technical information: expansion screw
Material: polypropylene