Recuperator REVENTON INSPIRO 350 / cross-flow - enthalpy
- Stock: Within 1-2 weeks
- Product Code: INSPIRO 350
- Weight: 33.00kg
REVENTON INSPIRO 350
Reventon INSPIRO is an air handling unit with an efficient cross-flow enthalpy recuperator. The recuperator is made of a special material that provides a high water-vapor permeability ratio, excellent tightness and good resistance to aging. The distance between the cellulose fibers allows the water vapor molecules to pass freely. Larger molecules, such as odors, cannot pass through the recuperator and enter the supply air. The equipment is available in the air range from 200 m3 / h - 800 m3 / h and will protect you from indoor air pollution.
Construction and operating principle
Housing: The equipment is made of steel, which is additionally covered with an insulating material to improve the acoustic and thermal properties. Mounting brackets are provided on the side of the unit to secure the unit. Thanks to the service door, convenient access to filters and heat exchanger is provided.
Outlets: The air outlets are equipped with plastic nozzles, the diameter of which ensures their installation with popular air duct sizes.
Recuperator: The enthalpy recuperator is made of a special material that allows efficient recovery of both heat and moisture from the room exhaust air. The enthalpy efficiency exceeds 70% ! Thanks to moisture recovery, it is not necessary to use an additional humidifier.
Filters: The unit has two sets of filters: pre-filter G3 and filter F9, which guarantees excellent indoor air quality. Differential pressure switch: provides pressure measurement and comparison before and after filters. If the set pressure measurement in the filters is exceeded, the controller reports that the filters need to be replaced. Before installing the machine, it is necessary to connect a pressure switch with transparent pipes.
Differential pressure switch: Provides pressure measurement and comparison before and after the filters. When the set pressure measurement in the filters is exceeded, the controller reports the need to change the filters. Before installing the device, it is necessary to connect a pressure switch with transparent tubes.
Air output control: The unit control provides 10 speed regulation.
Standard functions and equipment:
- 10 speed EC fan control
- Weekly schedule
- Automatically adjustable By-Pass valve
- Free Cooling function
- 2 air filters (class G3 and F9)
- Plastic air duct outlets
- Fire switch
- BMS output
- External ON/OFF switch
- STANDARD control panel
- The unit controller supports external sensor (CO2 / Humidity) or auxiliary heater control (Preheater / Afterheater)
TECHNICAL SPECIFICATION:
Manufacturer: | Reventon |
Country of origin: | Poland |
Sizes (LxWxH): | 814x804x270 mm |
Heat exchanger type: | cross-flow – enthalpy |
MAX enthalpy efficiency: | 73% |
MAX recovery factor: | 82% |
Engine power: | 107W |
Noise level: | 37.5 dB (A) |
Filter class: | G3 and F9 |
Mounting hole diameter: | Ø144 mm |
Power supply type: | 220 - 240V ~ 50Hz |