EPS pipeline mounting bracket (125-300 mm)

FOR EFFICIENT EPS PIPE ASSEMBLY!

The universal PE-FLEX® ventilation duct holder facilitates the assembly of the recuperation system using rigid insulated EPS ducts with external diameters from 125 to 300 mm.

The compact EPS duct mounting bracket allows quickly and aesthetically install EPS pipes of different diameters on the wall or ceiling using a clamp up to 9 mm wide.

Installation of the bracket to the wall or ceiling is done with a double-threaded screw, screwed into the expansion screw or directly into the wooden structural element. The possibility of using double-threaded screws of different lengths allows the EPS air duct to be mounted at the required distance from the ceiling or wall.

Mounting on the concrete wall/ceiling using an expansion plug and double-thread bolt (the distance can be adjusted by selecting an appropriate length bolt)

Direct mounting on the concrete wall/ceiling with a screw and wall plug (the distance cannot be adjusted).

Direct mounting on a wooden structure element using only a wooden bolt (without distance adjustment).

DIMENSIONS:

• Minimum external diameter of EPS channel: 125 mm
• Maximum external diameter of EPS channel: 300 mm
• Maximum clamp width: 9 mm
• Maximum clamp thickness: 2,5 m