iZZi V.302/402/H ERV M5 panel filter
This offer ends in:
- Stock: Within 2-3 weeks
- Product Code: iZZi V.302/402/H ERV/M5/ePM10 75% klases filtrs
- Dimensions: 245.00mm x 245.00mm x 36.00mm
iZZi V.302/402/H ERV/M5/ ePM10 75% class filter.
Panel filter in polyester frame with filtration class M5. Original filters for iZZi V.302 and iZZi V.402 ERV recuperator.
Advantages of IZZi filters:
- Large number of folds
- Large filtration area in relation to filter size
- High quality filter
- Compliance with the latest ISO16890 standard
- Durable and flexible fiberglass frame
- Arrow showing the direction of air flow
According to the latest ISO 16890 standard, most filters below M5 are coarse filters. Our filters have an increased filtration class to the minimum M5 (according to the new ePM10 standard 75%). The larger filtration area provides more dust capacity and prolongs its service life without creating high air resistance.
Why is air filtration so important?
People inhale about twenty kilograms of air every day. The health and well - being each of us depends to a large extent on its quality. Particles smaller than 5 microns are not filtered by our body - the nose and trachea - and go deep into the lungs, which can be dangerous to health. The main sources of dust are congested carriageways, adjacent industries, emissions from internal combustion engines, etc. Therefore, the role of filters in ventilation systems should not be underestimated, as we spend most of our time at home on a daily basis.
Can the panel filters be cleaned?
Yes. To extend its service life and reduce airflow resistance, filters can be shaken or vacuumed from coarse dirt and insects. However, remember that if the filter is already very dirty, it must be replaced immediately. Failure to replace the filters in a timely manner has a negative effect on the wear of the fans due to the high resistance, as well as pollutes both the recuperator and the entire equipment and air duct system as a whole.
SPECIFICATION
Type: Panel filter IZZi 300/302/H.302 ERV - For supply/exhaust |
Class: M5 |
Class according to ISO16890: ePM10 75% |
Maximum temperature: 65 ° C |
Maximum humidity: 90% |
Frame: Polyester PES fibers |
Cartridge: Polyester PES + polypropylene profile |
Size (mm): 245x245x36 |