VENTILATION
Stock: In Stock
Air duct 90° bend (Ø 75 mm) complete with 2 rubbers...
Price with VAT: 6.80€
Without VAT: 5.62€
Stock: In Stock
When purchasing a direct connection polycarbonate box with Ø125 mm, it may be difficult to extend the supply outlet in the future.
Thanks to the Ø123 mm nipple, the Ø125 mm polycarbonate box can be supplemented with 15, 30 and 50 cm extensions!
The product have a certificate from the National..
Price with VAT: 4.26€
Without VAT: 3.52€
Stock: Within 1 week
Collector socket designed to repair an incorrectly designed air - distribution box.
Application: The socket can be attached to the air distribution collector by supplementing it with an additional socket. To do this, use a metal cutter to cut an additional hole in the distribution box and secure..
Price with VAT: 7.51€
Without VAT: 6.21€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter. Both transition ends are equipped with rubber gaskets, which allow direct connection of metal or flexible air ducts to each other, including to external wall inlet..
Price with VAT: 6.73€
Without VAT: 5.56€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter. Both transition ends are equipped with rubber gaskets, which allow direct connection of metal or flexible air ducts to each other, including to external wall inlet..
Price with VAT: 11.65€
Without VAT: 9.63€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter. Both transition ends are equipped with rubber gaskets, which allow direct connection of metal or flexible air ducts to each other, including to external wall inlet..
Price with VAT: 8.83€
Without VAT: 7.30€
Stock: Within 1 week
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter.
Sizes:
Ød1 nom (mm)
Ød2 nom (mm)
L (mm)
Weight (kg)
160
80
15
0,30
100
30
0..
Price with VAT: 7.99€
Without VAT: 6.60€
Stock: In Stock
Diameter transitions is made of galvanized metal and is designed for convenient and quick connection of air ducts of different diameter.
Sizes:
Ød1 nom (mm)
Ød2 nom (mm)
L (mm)
Weight (kg)
160
80
15
0,30
100
30
0..
Price with VAT: 10.89€
Without VAT: 9.00€
Stock: In Stock
Rapid mounting screws with expansion pins available in two sizes: 6 × 40 mm and 8 × 60 mm. They can be used with many construction materials, such as: normal concrete C20/25, ceramic massive bricks for Class 15, silicate - filled bricks for Class 15, etc.
Quick assembly screws will be useful for..
Price with VAT: 11.89€
Without VAT: 9.83€
Stock: In Stock
Rapid mounting screws with expansion pins available in two sizes: 6 × 40 mm and 8 × 60 mm. They can be used with many construction materials, such as: normal concrete C20/25, ceramic massive bricks for Class 15, silicate - filled bricks for Class 15, etc.
Quick assembly screws will be useful for..
Price with VAT: 12.83€
Without VAT: 10.60€
Stock: In Stock
The double-sided screw is used to install the EPS mounting bracket for the installation of the EPS system.
The double thread allows the EPS bracket to be attached to a wooden structure or concrete wall/ceiling using an expansion screw.
The different screw lengths allow you to adjust the distan..
Price with VAT: 0.87€
Without VAT: 0.72€
Stock: In Stock
The double-sided screw is used to install the EPS mounting bracket for the installation of the EPS system.
The double thread allows the EPS bracket to be attached to a wooden structure or concrete wall/ceiling using an expansion screw.
The different screw lengths allow you to adjust the distan..
Price with VAT: 1.08€
Without VAT: 0.89€
%20(1)-350x350.png "EPS pipeline mounting bracket (125-300 mm)")
Stock: In Stock
FOR EFFICIENT EPS PIPE ASSEMBLY!
The universal PE-FLEX® ventilation duct holder facilitates the assembly of the recuperation system using rigid insulated EPS ducts with external diameters from 125 to 300 mm.
The compact EPS duct mounting bracket allows quickly and aesthetically install EPS pip..
Price with VAT: 3.74€
Without VAT: 3.09€
-1-350x350h.jpg "Air flow control valve Ø75 mm")
Stock: In Stock
FLX-DAS air flow control valves are designed for air flow control in flexible air duct systems. They are used in cases where an airtight seal is not required. Internal valve working angle 0 - 90 °. They are made of steel sheet. Stainless steel is also available on request.
Sizes:
..
Price with VAT: 17.52€
Without VAT: 14.48€
Stock: Within 1 week
FLX-DAS air flow control valves are designed for air flow control in flexible air duct systems. They are used in cases where an airtight seal is not required. Internal valve working angle 0 - 90 °. They are made of steel sheet. Stainless steel is also available on request.
Sizes:
..
Price with VAT: 18.25€
Without VAT: 15.08€
Stock: In Stock
The valve has a split flap closure on the inside, what allows to flow air only in one direction. The closing flaps are made of lightweight aluminum sheet attached to a steel rod with springs. Thanks to them, the flaps are kept in a closed position until the air flow occurs in the desired direction. ..
Price with VAT: 18.67€
Without VAT: 15.43€
Stock: In Stock
The valve has a split flap closure on the inside, what allows to flow air only in one direction. The closing flaps are made of lightweight aluminum sheet attached to a steel rod with springs. Thanks to them, the flaps are kept in a closed position until the air flow occurs in the desired direction. ..
Price with VAT: 20.06€
Without VAT: 16.58€
Stock: In Stock
The valve has a split flap closure on the inside, what allows to flow air only in one direction. The closing flaps are made of lightweight aluminum sheet attached to a steel rod with springs. Thanks to them, the flaps are kept in a closed position until the air flow occurs in the desired direction. ..
Price with VAT: 24.44€
Without VAT: 20.20€
Stock: In Stock
The connectin is intended for connecting air ducts. The connection provides the connection (extension) of both flexible (eg SONODEC CLASSIC) and rigid air ducts.
Made of galvanized steel sheet with two rubber seals.
Available sizes: Ø125, Ø160 Ø200 mm...
Price with VAT: 5.64€
Without VAT: 4.66€
Stock: In Stock
The connectin is intended for connecting air ducts. The connection provides the connection (extension) of both flexible (eg SONODEC CLASSIC) and rigid air ducts.
Made of galvanized steel sheet with two rubber seals.
Available sizes: Ø125, Ø160 Ø200 mm...
Price with VAT: 6.01€
Without VAT: 4.97€
Stock: In Stock
The connectin is intended for connecting air ducts. The connection provides the connection (extension) of both flexible (eg SONODEC CLASSIC) and rigid air ducts.
Made of galvanized steel sheet with two rubber seals.
Available sizes: Ø125, Ø160 Ø200 mm...
Price with VAT: 7.03€
Without VAT: 5.81€
Stock: In Stock
The set of adapters PE-FLEX® is intended for air duct system Ø75 mm, for crossing without elevation.
This allows to cross ventilation ducts or other installations and facilitates and makes it easier to install the ventilation system.
Set 1 includes:
..
Price with VAT: 53.11€
Without VAT: 43.89€
Stock: In Stock
The rubber seal is designed for installation on a flexible air duct to ensure a tight connection with the collectors BASIC and PREMIUM.
Must be installed between the second and third air duct "rib".
Available diameters - Ø75 and Ø90 mm...
Price with VAT: 0.97€
Without VAT: 0.80€
Stock: In Stock
The rubber seal is designed for installation on a flexible air duct to ensure a tight connection with the collectors BASIC and PREMIUM.
Must be installed between the second and third air duct "rib".
Available diameters - Ø75 and Ø90 mm...
Price with VAT: 1.57€
Without VAT: 1.30€