RECOM air handling units are equipped with an integrated control system. The control panel is equipped with a color LCD touch screen display. It has all the necessary control functions. With it, it is possible to regulate and control speed, temperature, receive operational errors or information abou..
CONTROLLER FUNCTIONS:
Extra thin – 10mm
Pleasant Scandinavian design
Easy control with touch sensitive buttons
3 ventilation intensitivity levels
Service & maintenance alerts
Can be controlled via app through WiFi and Bluetooth (no internet connection required)
Can be contolled v..
iZZi SF 200 – Duct-type preheater (0.5kW) / Filter box
The iZZi duct type box is a preheater and dual filter combination designed for installation on iZZi recuperators. The electric 500W preheater supports the anti-freeze operation of the iZZi recuperator, while the redundant filters (F5 + F7/F..
iZZi SF200 – Antismog insulated filter box with filter set M5/F9 (up to 550 m3/h)
Anti-smog filter boxes with M5 and F9 filters, intended for recovery equipment. They are used to filter incoming fresh air from ultra-fine particles PM10, PM2.5 and PM1, which are the most dangerous for humans. Th..
The ReQnet CO2 / Hydro module measures the concentration of carbon dioxide and humidity in a building. This allows you to automatically operate the unit based on the air quality in the house. Designed for self - assembly inside the control panel.
Why do you need to control ventilation?
The..
iZZi SF160 – Antismog insulated filter box M5/F9 iZZi SF (up to 250 m3/h)
Anti-smog filter boxes with M5 and F9 filters, intended for recovery equipment. They are used to filter incoming fresh air from ultra-fine particles PM10, PM2.5 and PM1, which are the most dangerous for humans. They are o..
ReQnet constant flow module allows automatic balancing of supply and exhaust air flows. Designed for self - assembly inside the control panel.
The module allows to automatically balance the ventilation system during the operation of the recuperator, adjusting the operation of the fans to the c..
Special duct type temperature sensor required when the reQnet unit is equipped with a pre-heater, post-heater, cooler, etc.
Complete with 3 m cable!
Sensor functions:
Adjustable measuring element depth
Additional stainless steel cover
ABS housing with silicone seal in the cove..
A special shielded 15 m long signal cable for connecting the display to the automation of reQnet equipment. It has an original plug on one side for easy connection of the control panel, and machined cable ends for connection to the machine on the other side.
Product features:
Original plu..
The CI70 control panel is a local control panel connected to the unit with a 2-core cable.
The CI70 has the following features: Commissioning, temperature adjustment, fan speed selection, temporary increased ventilation, home / Away selection, alarm code presentation, reset of alarms.
..
Humidity sensor CI77 transmits information about the humidity level in the room to increase the ventilation speed. It is suitable for ventilation systems with the Flexit GO control system and requires a CI75 wireless adapter.
..
CO2 sensor CI76 transmits information about the level of CO2 in the room to increase the ventilation speed. Suitable for ventilation systems with Flexit GO control system and requires CI75 wireless adapter.
..
The single-stage electric afterheater is equipped with a control unit and a temperature sensor. Thanks to this, the user can control the supply air temperature by setting it on the wall control panel.
TECHNICAL DOCUMENTATION..
The electric preheater is installed on the fresh air intake duct, before the recuperation unit. Designed to prevent recuperator icing at lower outdoor air temperatures.
TECHNICAL DOCUMENTATION..
The single-stage electric afterheater is equipped with a control unit and a temperature sensor. Thanks to this, the user can control the supply air temperature by setting it on the wall control panel.
TECHNICAL DOCUMENTATION..
The electric preheater is installed on the fresh air intake duct, before the recuperation unit. Designed to prevent recuperator icing at lower outdoor air temperatures.
TECHNICAL DOCUMENTATION..
The electric preheater is installed on the fresh air intake duct, before the recuperation unit. Designed to prevent recuperator icing at lower outdoor air temperatures.
TECHNICAL DOCUMENTATION..
The single-stage electric afterheater is equipped with a control unit and a temperature sensor. Thanks to this, the user can control the supply air temperature by setting it on the wall control panel.
TECHNICAL DOCUMENTATION..
The intelligent control panel PREMIUM is intended for the control of INSPIRO equipment.
The PREMIUM control panel has a liquid crystal LCD screen with touch buttons. The device has a modern design and aesthetic appearance that will fit into any interior!
The controller has a 5 m long cable tha..
CO₂ sensor for INSPIRO recuperators. Connecting a sensor to the recuperator allows you to keep the CO₂ concentration below the level set by the user...
Relative humidity sensor for INSPIRO recuperators. Adding a sensor to the recuperator allows you to keep the humidity level below the level set by the user. In order to integrate the sensor with the recuperator, it is necessary to use the intelligent PREMIUM control panel...