VENTILATION
%20(1)-350x350.png "reQnet: Duct-type preheater (0.5kW) / Filter box")
Stock: Within 2-3 weeks
iZZi SF 200 – Duct-type preheater (0.5kW) / Filter box
The iZZi duct type box is a preheater and dual filter combination designed for installation on iZZi recuperators. The electric 500W preheater supports the anti-freeze operation of the iZZi recuperator, while the redundant filters (F5 + F7/F..
Price with VAT: 401.72€
Without VAT: 332.00€
-350x350.jpg "Anti-smog isolated filter box M5/F9 iZZi SF (up to 550 m3/h) with filter set")
Stock: Within 1-2 weeks
iZZi SF200 – Antismog insulated filter box with filter set M5/F9 (up to 550 m3/h)
Anti-smog filter boxes with M5 and F9 filters, intended for recovery equipment. They are used to filter incoming fresh air from ultra-fine particles PM10, PM2.5 and PM1, which are the most dangerous for humans. Th..
Price with VAT: 329.73€
Without VAT: 272.50€
Stock: Within 2-3 weeks
The ReQnet CO2 / Hydro module measures the concentration of carbon dioxide and humidity in a building. This allows you to automatically operate the unit based on the air quality in the house. Designed for self - assembly inside the control panel.
Why do you need to control ventilation?
The..
Price with VAT: 443.01€
Without VAT: 366.12€
Stock: Within 1-2 weeks
iZZi SF160 – Antismog insulated filter box M5/F9 iZZi SF (up to 250 m3/h)
Anti-smog filter boxes with M5 and F9 filters, intended for recovery equipment. They are used to filter incoming fresh air from ultra-fine particles PM10, PM2.5 and PM1, which are the most dangerous for humans. They are o..
Price with VAT: 244.13€
Without VAT: 201.76€
Stock: Within 2-3 weeks
ReQnet constant flow module allows automatic balancing of supply and exhaust air flows. Designed for self - assembly inside the control panel.
The module allows to automatically balance the ventilation system during the operation of the recuperator, adjusting the operation of the fans to the c..
Price with VAT: 234.01€
Without VAT: 193.40€
Stock: Within 2-3 weeks
Special duct type temperature sensor required when the reQnet unit is equipped with a pre-heater, post-heater, cooler, etc.
Complete with 3 m cable!
Sensor functions:
Adjustable measuring element depth
Additional stainless steel cover
ABS housing with silicone seal in the cove..
Price with VAT: 76.52€
Without VAT: 63.24€
Stock: Within 2-3 weeks
A special shielded 15 m long signal cable for connecting the display to the automation of reQnet equipment. It has an original plug on one side for easy connection of the control panel, and machined cable ends for connection to the machine on the other side.
Product features:
Original plu..
Price with VAT: 51.04€
Without VAT: 42.18€
Stock: Within 1-2 weeks
The single-stage electric afterheater is equipped with a control unit and a temperature sensor. Thanks to this, the user can control the supply air temperature by setting it on the wall control panel.
TECHNICAL DOCUMENTATION..
Price with VAT: 228.93€
Without VAT: 189.20€
Stock: Within 1-2 weeks
The electric preheater is installed on the fresh air intake duct, before the recuperation unit. Designed to prevent recuperator icing at lower outdoor air temperatures.
TECHNICAL DOCUMENTATION..
Price with VAT: 170.85€
Without VAT: 141.20€
Stock: Within 1-2 weeks
The single-stage electric afterheater is equipped with a control unit and a temperature sensor. Thanks to this, the user can control the supply air temperature by setting it on the wall control panel.
TECHNICAL DOCUMENTATION..
Price with VAT: 296.69€
Without VAT: 245.20€
Stock: Within 1-2 weeks
The electric preheater is installed on the fresh air intake duct, before the recuperation unit. Designed to prevent recuperator icing at lower outdoor air temperatures.
TECHNICAL DOCUMENTATION..
Price with VAT: 190.21€
Without VAT: 157.20€
Stock: Within 1-2 weeks
The electric preheater is installed on the fresh air intake duct, before the recuperation unit. Designed to prevent recuperator icing at lower outdoor air temperatures.
TECHNICAL DOCUMENTATION..
Price with VAT: 228.93€
Without VAT: 189.20€
Stock: Within 1-2 weeks
The single-stage electric afterheater is equipped with a control unit and a temperature sensor. Thanks to this, the user can control the supply air temperature by setting it on the wall control panel.
TECHNICAL DOCUMENTATION..
Price with VAT: 325.73€
Without VAT: 269.20€
Stock: Within 1-2 weeks
The intelligent control panel PREMIUM is intended for the control of INSPIRO equipment.
The PREMIUM control panel has a liquid crystal LCD screen with touch buttons. The device has a modern design and aesthetic appearance that will fit into any interior!
The controller has a 5 m long cable tha..
Price with VAT: 155.19€
Without VAT: 128.26€
Stock: Within 1-2 weeks
CO₂ sensor for INSPIRO recuperators. Connecting a sensor to the recuperator allows you to keep the CO₂ concentration below the level set by the user...
Price with VAT: 247.43€
Without VAT: 204.49€
Stock: Within 1-2 weeks
Relative humidity sensor for INSPIRO recuperators. Adding a sensor to the recuperator allows you to keep the humidity level below the level set by the user. In order to integrate the sensor with the recuperator, it is necessary to use the intelligent PREMIUM control panel...
Price with VAT: 109.92€
Without VAT: 90.84€
Stock: Within 1-2 weeks
..
Price with VAT: 113.27€
Without VAT: 93.61€
Stock: Within 1 week
Panel with a touch screen for parameters of air handling unit setting and indication. The panel has integrated thermometer and hygrometer for indoor climate monitoring. Intended for units with C5 control system.
Parameters:
Extremely thin – only 12 mm
3 ways of fixing the panel
Integrat..
Price with VAT: 292.93€
Without VAT: 242.09€
Stock: Within 1 week
Panel with a touch screen for parameters of air handling unit setting and indication. The panel has integrated thermometer and hygrometer for indoor climate monitoring.
Parameters:
Integrated web server
Modern design
Factory preset parameters
Indication of parameters
Setting of all ..
Price with VAT: 288.21€
Without VAT: 238.19€
Stock: Within 1 week
Panel for setting and displaying air handling unit parameters.
Parameters:
Designed for controlling Domekt air handling units with C6, C8 automation
Simple control
Operating modes
Touchscreen
Integrated thermometer and hygrometer
Extra thin – only 12 mm
3 mounting options..
Price with VAT: 148.94€
Without VAT: 123.09€
Stock: Within 1 week
WALL MOUNTED, SENSORY, AIR QUALITY, HUMIDITY AND TEMPERATURE SENSOR-CONTROLLER
Air quality (AQ) ventilation intensity control option depends on the external sensor signal. Provides ventilation intensity correction according to the increased CO2 , humidity level, etc. A different AQ functio..
Price with VAT: 250.97€
Without VAT: 207.41€
Stock: Within 1 week
DUCT MOUNTED AIR QUALITY, HUMIDITY AND TEMPERATURE SENSOR
Air quality (AQ) ventilation intensity control option depends on the external sensor signal. Provides ventilation intensity correction according to the increased CO2 , humidity level, etc. A different AQ function may be set dependin..
Price with VAT: 306.92€
Without VAT: 253.65€
Stock: Within 1 week
WALL MOUNTED, SENSORY, CO2, HUMIDITY AND TEMPERATURE SENSOR-CONTROLLER
Air quality (AQ) ventilation intensity control option depends on the external sensor signal. Provides ventilation intensity correction according to the increased CO2 , humidity level, etc. A different AQ function may be..
Price with VAT: 399.59€
Without VAT: 330.24€
Stock: Within 1 week
DUCT MOUNTED AIR QUALITY, HUMIDITY AND TEMPERATURE SENSOR
Air quality (AQ) ventilation intensity control option depends on the external sensor signal. Provides ventilation intensity correction according to the increased CO2 , humidity level, etc. A different AQ function may be set dependin..
Price with VAT: 399.59€
Without VAT: 330.24€